Name: Cinturino in Tela a Sgancio Rapido - Navy Blu
Brand: Archer Watch Straps
SKU: ARC-QRC-NVY18
Price: 21.99 EUR
Availability: InStock

Versatilità Classica

Grazie alla sua rifinitura di altissimo livello e un design pulito e minimalista, il cinturino in tela a sgancio rapido aggiunge un tocco vintage a qualsiasi orologio. È dotato di una fibbia in acciaio inox spazzolato firmata Archer e ogni foro è accuratamente ricamato con cuciture precise che non si strappano né si sfilacciano.

Per uno stile disinvolto e casual, oppure per un look semi-formale o di lusso. La tela intrecciata evoca un'estetica classica e vintage con un tocco di semplicità. Abbinalo a qualsiasi stile, dal moderno al casual raffinato, fino a un look più robusto e avventuroso.

Caratteristiche Principali

Facilmente Sostituibile

Grazie alle barrette a molla a sgancio rapido, sostituire le cinghie è semplicissimo. Basta far scorrere la leva con un dito per far entrare e uscire i cinturini.

Massimo Comfort

La nostra tela di cotone traspirante è resistente all'acqua e confortevole sul polso, per mantenerti fresco anche dopo un uso prolungato.

Ricamo Dettagliato

Ogni foro è rinforzato individualmente e il cinturino presenta cuciture precise che non si strappano né si sfilacciano.

Domande Frequenti

What are the strap lengths for each size?

18mm: Short side 75mm / Long side 120mm
20mm: Short side 75mm / Long side 125mm
22mm: Short side 75mm / Long side 130mm

What is the canvas material made of?

Our canvas material is made from 100% cotton. The stitching and the inner core are made of polyester.

How do I clean canvas straps?

We recommend gentle hand washing with soap and water.

Can I swim with my canvas watch strap?

No, canvas is not recommended for swimming. It'll absorb water and stay wet and uncomfortable. Saltwater and chlorine will also cause it to degrade faster.

How does the quick-release feature work and is it secure?

Our quick-release spring bars make swapping straps incredibly simple - just slide the small lever with your finger to pop straps in and out in seconds, no tools required. Despite the easy removal, the mechanism is completely secure when locked in place and won't accidentally release during normal wear. The quick-release feature is built into the spring bars themselves, so there are no bulky adapters or loose parts. This system allows you to instantly change your look to match different outfits, occasions, or activities while maintaining the same reliable connection as traditional spring bars.

What wrist sizes do your straps fit?

Most of our straps comfortably fit wrists from approximately 5.5" (14cm) to approximately 8" (20cm) in circumference, depending on the strap width and the size of your watch case. If you have a larger wrist, consider looking at our Custom Fit straps.

Do your straps contain PFAs ("forever chemicals")?

No. Our watch straps are free of PFAs and are made with high-quality, safe materials.

How do I know what size watch strap I need?

You'll need to measure the lug width of your watch — that's the space between the two small posts (lugs) where the strap attaches to the watch case. Lay your watch flat, remove the old strap if possible, and use a ruler or caliper to measure that gap in millimeters. Common sizes are 18mm, 20mm, and 22mm. We also offer 16mm, 19mm, 21mm, 23mm, and 24mm widths in some straps. If you're not sure, just send us a message with your watch's make and model and we'll help you figure it out.

How do I install a quick-release strap on my watch?

Simply slide the quick-release lever on the spring bar with your finger, position the strap between the lugs, and release the lever so the spring bar pops into the lug holes. No tools needed! The whole process takes just a few seconds.

How do I change or replace the buckle on my strap?

The buckle is held in place by a spring bar. To remove it, stick a small pointed object (like the end of a paperclip, sewing needle, or the pin end of a spring bar tool) into one of the small holes on the side of the buckle. Press the spring bar in and slide the buckle off. To attach the new buckle, just reverse the process — push the spring bar end in, slide the buckle on, and make sure both ends pop into the holes.

How do I use the original spring bars from my watch instead of the quick-release ones?

Remove the quick-release spring bars from the strap, then insert your watch's original spring bars in their place. Note that this means the quick-release function won't work — you'll need a spring bar tool to swap straps. But it can help with fit if your watch has non-standard lugs.

Più Opzioni Sgancio Rapido

Pelle

Eleganza e classicità. Il cinturino in pelle è realizzato con cura, intramontabile, è liscio come la seta, resistente e vanta uno stile raffinato e senza fronzoli.

Scopri Pelle

Nylon

Con due strati di nylon impermeabile da 1,2 mm di spessore, cuciture robuste e componenti metalliche in resistente acciaio inox, i cinturini sosterranno qualsiasi sfida.

Scopri Nylon